Integral Modulating IP67 90W 45S Compact Actuator

Integral designed modulating type compact actuator / no extra cavity for control box

DCL-05E~250E parameters.pdf

Features

• Quarter turn operation with modulating controlled by 4-20mA/1-5V/2-10V input signal
• Actuator output drive position is proportional to input signal
• Full potted multi-function smart control pack, world leading anti-interference ability
• Self-calibrating and problem self-checking function
• Unique integral motor/control pack/ housing design with very small size and beautiful appearance
• IP 67 and Type 4X hard die cast aluminum alloy housing with NBR sealing
• Up to 1200 times/hour starting frequency and over 200,000 times starting test with full rated load
• Heavy duty motor with thermal overload protection
• Standard ISO5211 multi-flange valve mounting
• Manual override
• CSA certificated complied to UL and CSA standard/ CE marked

Description

DCL modulating type electric actuators are S4 intermittent periodic duty operation. Actuator sequential, identical starts, runs and rests cycles with rated load. As the starting current affects temperature rise, if motor is not proper designed, actuator will be easily shut down during high frequently starts by thermal overheat protector in motor and actuator body will be very hot. 

DCL modulating type electric actuator with smart control pack is controlled by a 4-20mA or 2-10V input control signal. Changing the input control signal results in a proportional position change of the actuator out drive. Meantime output a 4-20mA ratio signal to feedback the actual position of actuator out drive as standard. With motor power on but a loss of control signal, actuator can be set to fail closed, fail open or fail in place.

The smart control pack is fully potted to protect the electronics from vibration and moisture. Actuator passed rigorous EMC test, including EFT, ESD and surge tests, and certified by CSA complied to UL and CSA standard.

Specification