Midea Group - ChinaDCL has been our partner and supplier for over 6 years. Their electric actuators are used to drive our guide vane of our refrigeration compressors. Our central air conditioners are serviing customers in HVAC all around the world with DCL's products. They continuously provide very reliable products and very ontime service to support us.
Valve Solution Inc. - USADCL has been our ODM/OEM plant for about ten years. Their products are designed per UL and CSA standard and passed CSA certification. Very few Chinese manufacturers can produce USA's standard electric actuaotrs with such good quality, that is why we choose them as our long term partner. We are expecting DCL can keep innovation.
WESA Armaturen GmbH - GermanyWith 15 years cooperation with DCL, we are very satified with DCL's products. DCL regards quality first and their employees are very rigorous to products. They always do many experiments and tests to confirm their new designs and upgrade. We are also amazing about their wonderful quality control for the outsourcing parts.
DCL 110V Quarter Turn Electric Actuator With Handwheel
|Standard Time/Torque||25S/50Nm||Installation Angle||360°|
|Total Weight||1.2KG To 20KG||Motor Power||6W To 140W|
|Ambient Temperature||-25℃~+55℃ / -13°F~+131°F||Protection Grade||IP67 NEMA4/4X|
110V Quarter Turn Electric Actuator,
Handwheel Quarter Turn Electric Actuator,
CE Quarter Turn Actuator
Dcl 110V Electric Control Actuator with Valve, Quarter Turn Actuator with handwheel
Permanently Lubricated Heavy Duty Aluminum Alloy
Manual Override (except on the M25)
Adjustable Travel Stops
NEMA 4, 4X Weatherproof Enclosure
ISO 5211 Direct Mount Capabilities
1/2" NPT Conduit Entries (2),G1/2 water-proof cable
Thermal Overload Protection
80% Duty Cycle
4 Limit Switches
Standard 110V AC Single Phase Options
Type DCL-05 Series actuator Performance Parameters:
Motor power :24VDC 24VAC 110VAC 220VAC 380VAC
Optional Time/Torque:4s/20Nm 10s/30Nm,60s/50Nm
Turning Angle: 0~360 degree
Installation angle: 360degree at any angle
Electric interface:Two G1/2 water-proof Cable connectors, one for power line and one for signal line.
Optional Fuction : Heater for eliminating mositure
Square: 9*9 11*11 14*14
Flange: F03 F05 F07
DCL common series electric actuator are typically used to drive quarter turn butterfly valves, ball valves, dampers and swinging arms. On receipt of a continuous power signal, the motor runs one direction and via an all metal gear box with last stage worm gear train rotates the output drive 90°. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the output drive position.
Over torque protector is optional only if accurate output torque is needed. PTC electronic heating component is also used as thermostatically controlled anti-condensation heater that will protect actuator against damage from condensation.
|Actuator Type||Standard Time/Torque||Optional Time/Torque||Turning Angle(Max.range)||Total Weight||Power Supply||Selected Control Circuit|
|DCL-02||15S/18Nm||7S/9Nm 60S/18Nm||0~90°Adjustable||1.2Kg||DC24V/AC24V AV110V/AC220V||Types of A/B/E/G|
|DCL-05||20S/50Nm||4S/20Nm 10S/30Nm 60S/50Nm||0~360°Adjustable||2.5Kg||DC24V/AC24V AV110V/AC220V/AC380V||Types of A/B/C/D/E/F/G/H|
|DCL-10||30S/100Nm||15S/50Nm 60S/100Nm||0~360°Adjustable||4.5Kg||DC24V/AC24V AV110V/AC220V/AC380V||Types of A/B/C/D/E/F/G/H|
|DCL-20||30S/200Nm||15S/100Nm 60S/200Nm||0~90°Adjustable||9Kg||DC24V/AC24V AV110V/AC220V/AC380V||Types of A/B/C/D/E/F/G/H|
|DCL-100||30S/1000Nm||15S/500Nm||0~90°Adjustable||19Kg||AV110V/AC220V/AC380V||Types of A/B/C/D/E/F/H|
|Performance Parameters List of Adjusting type(Type E)|
|Actuator Type||Butterfly Valve(≤PN1.0MPa)||Ball Valve(≤PN1.6MPa)||Vent Valve(≤PN0.1MPa)|