Midea Group - ChinaDCL has been our partner and supplier for over 6 years. Their electric actuators are used to drive our guide vane of our refrigeration compressors. Our central air conditioners are serviing customers in HVAC all around the world with DCL's products. They continuously provide very reliable products and very ontime service to support us.
Valve Solution Inc. - USADCL has been our ODM/OEM plant for about ten years. Their products are designed per UL and CSA standard and passed CSA certification. Very few Chinese manufacturers can produce USA's standard electric actuaotrs with such good quality, that is why we choose them as our long term partner. We are expecting DCL can keep innovation.
WESA Armaturen GmbH - GermanyWith 15 years cooperation with DCL, we are very satified with DCL's products. DCL regards quality first and their employees are very rigorous to products. They always do many experiments and tests to confirm their new designs and upgrade. We are also amazing about their wonderful quality control for the outsourcing parts.
20mADC ExdⅡCT4//ExdⅢCT130 Explosion Proof Electric Actuator
|Standard Torque||0Nm To 600Nm||Standard Time||20s To 45s|
|Name||DC Rotary Electric Actuator||Input Signal||4-20mA/2-10V/1-5V|
|Type||Explosion Proof Actuator||Output Signal||4-20mA|
|Feature||ExdⅡB T4 Grade||Explosion Proof Grade||ExdIIBT4 / Group C, D T4|
|Protection Grade||IP68 NEMA 4X||Power Supply||24VDC|
|Total Weight||3kg To 10kg||Motor Power||13W To 70W|
|Installation Angle||360°||Ambient Temperature||-25℃~+55℃ / -13°F~+131°F|
ExdⅡB T4 Explosion proof electric actuator,
20mADC valve actuator
Explosion proof DC rotary electric actuator / ExdⅡC T4 grade for Zone 1 and Division 1
DCL-Ex10GE/Ex40GE are 24VDC power motorized electric actuator. Full enclosed DC brush motor with flameproof surface ensure sparks will not go to another cavity. Fully potted controller to help protect the electronics from vibration and moisture. Cylinder stop type connection surfaces with flame proof gap and length comply to ATEX, UL and CSA standard. Valve position indicator is covered with 10mm tempered glass that can keep strength in extra high and extra low temperature to ensure clear vision even when fire happens. Anti-condensation heater is optional to protect actuator against moist. Enclosures and covers are 100% tested by DCL before acceptable from suppliers to ensure machining precise.
DCL explosion proof electric actuators are widely used for explosive gases environment. High temperature may ignite the flammable gases out of actuator. T4 grade requires the highest enclosure outside surface’s temperature must be less than 135℃(300F), in whatever conditions. Considering a buffer for errors may happen, the temperature set for motor power down is 125℃(282F). PTC overheat protector is embedded in the motor winding-trips, where is the highest temperature rise part of whole actuator, instead of out of motor, to 100% ensure outer surface temperature will not go beyond required T4 grade.
Explosion proof electric actuators are in process of CSA tests and will be certified by CSA in Q3 2020. CE/ATEX/RoHS 3.0 have been tested and complied.
|Output Torque||0～100Nm Optional||100～400Nm Optional||100～600Nm Optional|
|Basic Error||no more than ±1%|
|Reciprocating Error||No more than 1%|
|Dead Space||0.5~5.0% adjustable|
|Damping Characteristic||0 times|
|Repeating Error in Actuator||≤1%|
|Turning Angle||0～900 Adjustable|
|Withstand Voltage Class||500VAC 1 minutes|
|Installation Angle||3600 at any angle|
|Electric Interface||Two G1/2 Wate-proof Cable Connectors,one for power line and one for signal line|
|Optional Function||Heater/Passive contact switch/Dome indicator|
|Standard Torque:||0Nm To 600Nm|
|Name:||DC Rotary Electric Actuator|
|Type:||Explosion Proof Actuator|
|Feature:||ExdⅡC T4 Grade|
|Protection Grade:||IP68 NEMA 4X|
|Total Weight:||3kg To 10kg|
|Standard Time:||20s To 45s|
|Explosion Proof Grade:||ExdIIBT4 / Group C, D T4|
|Motor Power:||13W To 70W|
|Ambient Temperature:||-25℃~+55℃ / -13°F~+131°F|
- Modulating type powered by 24VDC, quarter turn operation
- Torque can be precisely setting within a certain range
- Heavy duty DC brush motor with lower temperature rise, longer life, provide high start torque and very small inertia force
- Torque test control and over torque protection by current
- PTC electronic heating component to prevent condensation in actuator
- Compact smart resin plastic packaged proportional control pack installed
- IP 68 watertight robust aluminum alloy enclosure, protection against dust and water
- Self-locking worm gear train, no additional brake needed
- UL standard for Zone and Division System/ATEX/CE marked/RoHS 3 complied