Midea Group - ChinaDCL has been our partner and supplier for over 6 years. Their electric actuators are used to drive our guide vane of our refrigeration compressors. Our central air conditioners are serviing customers in HVAC all around the world with DCL's products. They continuously provide very reliable products and very ontime service to support us.
Valve Solution Inc. - USADCL has been our ODM/OEM plant for about ten years. Their products are designed per UL and CSA standard and passed CSA certification. Very few Chinese manufacturers can produce USA's standard electric actuaotrs with such good quality, that is why we choose them as our long term partner. We are expecting DCL can keep innovation.
WESA Armaturen GmbH - GermanyWith 15 years cooperation with DCL, we are very satified with DCL's products. DCL regards quality first and their employees are very rigorous to products. They always do many experiments and tests to confirm their new designs and upgrade. We are also amazing about their wonderful quality control for the outsourcing parts.
Adjustable 50Nm 20s Explosion Proof Valve Actuator
|Standard Torque||50Nm||Standard Time||20s|
|Explosion Proof Grade||ExdIICT4, ExdⅢC T130||Total Weight||3kg|
|Motor Power||6W To 13W||Installation Angle||360°|
|Protection Grade||IP68 NEMA7||Ambient Temperature||-25℃~+55℃ / -13°F~+131°F|
NEMA4X explosion proof actuator,
DCL Explosion Proof Actuator,
IP67 waterproof valve Actuator
Explosion proof electric actuator for Zone 1 & Division 1 / turning angle 0-360° adjustable
- Turning angle ≤360° adjustable with electric limit switches
- Explosion proof grade ExdIICT4 for Zone system and Group C, D T4 for Division system
- Stainless steel visual valve position indicator with 10mm tempered glass lens
- Hard die cast aluminum alloy enclosure to resistance to high explosive pressure inside
- Heavy duty fully enclosed squirrel-cage asynchronous motor with fire treatment
- Manual override with Allen handle/handwheel optional
- Double lip skeleton oil seal and O-ring seal to ensure protection grade to IP68
- Standard ISO 5211 direct mounting
DCL-Ex05 explosion electric actuator can set turning angle up to 340 degree. Actuators are widely used in environment with explosive gas, such as Ethylene, Ether, Ethanol etc. Cylinder stop type connection surface of each housing cover complied to UL standard flame proof gap and length. The processing quality of flame proof surface is the key process to ensure explosion grade, so the machining tolerance range must be smaller than UL standard requirements. Thus, every explosion body or cover from supplier is strictly tested by DCL before assembling.
DCL actuators use self-designed motors that is non-ventilated and full enclosed with high start torque. Due to the very compact size of actuator, the temperature rise of motor must not be high during heavy duty operation, to make sure the outer shell’s temperature will not go beyond 135℃ or 300.6F.
|Optional Time/Torque||4S/20Nm 10S/30Nm||4S/20Nm 10S/30Nm 60S/50Nm|
|Turning Angle||0～3600 Adjustable|
|Available Control Circuit||Type of A,B,C,D,E,F,G,H,|
|Withstand Voltage Class||DC24V/AC24V: 500VAC 1 minute,AC110V/AC220V: 1500VAC 1 minute,AC380V: 1800VAC 1 minute|
|Installation Angle||3600 at any angle|
|Electric Interface||2-M20×1.5explosion-proof plug,clients should install corresponding explosion-proof cable connector when using according to the cable selected.|
|Optional Function||Heater for eliminating moisture|