IP68 DC Rotary Actuator

DC rotary actuator / motor with permanent rotor / very low temperature rise

Features

• Quarter turn standard, turning angle smaller than 360° optional
• Torque can be precisely setting within a certain range
• Heavy duty DC brush motor with lower temperature rise, longer life, provide high start torque and very small inertia force
• IP 68 watertight robust aluminum alloy enclosure, protection against dust and water
• Torque test control and over torque protection by current
• Two more limit switches to confirm valve position
• Self-locking when power off
• Strong gear train with soft nitriding metal gears
• Standard ISO5211 multi-flange installation
• CE marked/RoHS 3 tested/CSA listed

Specification:

Description

DCL-02G is widely used in high security industry sites with safety power 24VDC or 12VDC, that can guarantee field workers will not get the risk of high voltage electric shock. The rare earth material magnet in motor has much stronger magnetism than normal ferrite magnet, which can provide higher torque in smaller volume. Moreover, this motor’s robustness is perfect to avoid the commonly seen problems of most DC motors, such as speed is lower when load is higher, or speed is higher when load is lower. Thus, actuator can operate in a smooth speed when load vibration and the temperature rise is very low.

Actuators have been rigorous tested by CSA and certified per UL and CSA standard. In chemical and food & beverage industry, the fluid needs to be controlled very fine, so the actuator start frequency is very high. 1200 times/hour can reach world leading level and can meet requirements of above industries.