Midea Group - ChinaDCL has been our partner and supplier for over 6 years. Their electric actuators are used to drive our guide vane of our refrigeration compressors. Our central air conditioners are serviing customers in HVAC all around the world with DCL's products. They continuously provide very reliable products and very ontime service to support us.
Valve Solution Inc. - USADCL has been our ODM/OEM plant for about ten years. Their products are designed per UL and CSA standard and passed CSA certification. Very few Chinese manufacturers can produce USA's standard electric actuaotrs with such good quality, that is why we choose them as our long term partner. We are expecting DCL can keep innovation.
WESA Armaturen GmbH - GermanyWith 15 years cooperation with DCL, we are very satified with DCL's products. DCL regards quality first and their employees are very rigorous to products. They always do many experiments and tests to confirm their new designs and upgrade. We are also amazing about their wonderful quality control for the outsourcing parts.
ExdⅡC T4 Compact IP68 Explosion Proof Electric Actuator
|Standard Torque||100Nm To 600Nm||Standard Time||30s To 45s|
|Total Weight||5kg To 10kg||Power Supply||24VAC/110VAV/220VAC/380VAC/24VDC|
|Motor Power||15W To 90W||Ambient Temperature||-25℃~+55℃ / -13°F~+131°F|
|Installation Angle||360°||Protection Grade||IP68 NEMA4X|
ExdIIBT4 explosion proof valve actuator,
IP68 Explosion Proof Electric Actuator,
600Nm explosion proof valve actuator
ExdⅡC T4 grade compact explosion proof electric actuator / quarter turn / IP68
- Quarter turn operation with mechanical limits
- Cylinder stop type connection surfaces of every housing cover, flame proof gap and length complied to UL and CSA standard
- Class 1 Zone 1 AExdIICT4 grade and Class 1 Division 1, Group C, D T4.
- Double lip skeleton oil seal and O-ring seal to ensure protection grade to IP68.
- 10mm high strength glass lens for valve position indicator, keep strong hardness both in low temperature(-22F) and high temperature(140F).
- Hard die cast aluminum alloy enclosure to ensure actuator's resistance of high explosion pressure(＞2.2 MPa).
- Non-ventilated motor with fire treatment.
- Duty rate is 70%, S2 short time duty with continuous operation less than 15mins and S4 intermittent type operation with 1200times/hour.
- ISO5211 multi flange mounting.
- CSA certification in process per UL standard/ATEX marked
DCL explosion proof electric actuators are widely used in potential environment of flammable and explosive, such as petroleum, chemical, power plant, liquid gas, winery and metallurgy etc. To ensure workers are away from danger, explosion proof is a must. For different industries, zones and divisions, different explosion proof grade is required.
Actuators with ExdIICT4 and Group C, D T4 grade can be used in 90% explosive gas atmospheres except for colliery. The maximum surface temperature of actuator is less than 135℃ and 300.6F during severe duty applications. Over 10 years of safety operations in China, now all series anti explosion actuators are on rigorous test process of CSA and will be certified in Q3 of 2020.
|Optional Time/Torque||15S/50Nm||15S/50Nm 60S/100Nm|
|Turning Angle||0～900 Adjustable|
|Available Control Circuit||Type of A,B,C,D,E,F,G,H,|
|Withstand Voltage Class||DC24V/AC24V: 500VAC 1 minute,AC110V/AC220V: 1500VAC 1 minute,AC380V: 1800VAC 1 minute|
|Installation Angle||3600 at any angle|
|Electric Interface||2-M20×1.5explosion-proof plug,clients should install corresponding explosion-proof cable connector when using according to the cable selected.|
|Optional Function||Over-torque Protector/Heater|